等待装车
近期，车间一片繁忙，订单一个接一个。确保每一台产品合格后再发出，保质保量的送到客户手中，严创科技工作人员丝毫没有懈怠连续加班多日生产。
7月31号，由严创科技制造生产的中频炉机械手顺利完成装柜，即将开启他们的沙特旅程。
等待装车
炉前机械手，是严创科技针对众多钢厂融化废钢问题而研发生产的设备。它能轻松压实加料时部分卡阻的较大体积的废钢或过于疏松的轻薄料，使废钢体积迅速缩小、密实度增大；从而提高能量转换，极大地提高了感应炉的熔炼效率。同时能快速、灵活的把感应炉周边的废钢及打包压块扫进炉体。附带远程进程两种遥控操作，使操作人员远离炉口区域，减少安全隐患。
如今，严创科技中频炉炉前机械手，已出口到世界众多国家，印尼、越南、泰国、菲律宾、缅甸、尼日利亚、阿尔及利亚、土耳其、伊拉克、伊朗、巴基斯坦、埃及等。。。
等待装车
炉前机械手技术创新：
（1）全机构创新采用液压缸驱动机械手的伸缩、升降和旋转功能，驱动力大，运行平稳。
（2）伸缩机构前端拨杆创新设计为快装结构，可以实现快速更换。
（3）液压元件创新集中设计在设备后部，能远离热源，增加设备运行的稳定性和可靠性。液压站配备11KW高效节能油泵电机组，在设备不工作时自动停泵卸压，进出油温有水冷设备进行冷却，温度差值控制在5℃左右。
（4）电气控制方式采用就地和远程两种控制方式，可以自由切换。远控操作能自由停机和紧急切断电源。
（5）设备体积小，操作方便、灵活。
Concentrate and set sail again, ready to embark on the journey
——The manipulator for IF was shipped to Saudi Asas steel again
Recently, the workshop has been busy, with orders one by one. Ensure that each product is delivered after it is qualified and delivered to customers with quality and quantity guaranteed. YanChuang's scientific and technological staff are not slack at all and work overtime for many days.
On July 31, the manipulator of IF furnace manufactured by Yanchuang technology successfully completed the cabinet loading and is about to start their journey to Saudi Arabia.
The IF manipulator is the equipment developed and produced by Yanchuang technology for melting scrap in many steel mills. It can easily compact the large volume of scrap or too loose light and thin materials partially blocked during feeding, so as to rapidly reduce the volume of scrap and increase the compactness; Thus, the energy conversion is improved and the smelting efficiency of the induction furnace is greatly improved. At the same time, it can quickly and flexibly sweep the scrap and packing pressing block around the induction furnace into the furnace body. With two remote control operations of remote process, the operator can stay away from the furnace mouth area and reduce potential safety hazards.
Today, Yanchuang technology's IF manipulator has been exported to many countries in the world, such as Indonesia, Vietnam, Thailand, the Philippines, Myanmar, Nigeria, Algeria, Turkey, Iraq, Iran, Pakistan, Egypt, etc...
Technical innovation of IF manipulator:
(1) The whole mechanism innovatively adopts hydraulic cylinder to drive the telescopic, lifting and rotating functions of the manipulator, with large driving force and stable operation.
(2) The front-end paddle of the telescopic mechanism is innovatively designed as a quick installation structure, which can realize rapid replacement.
(3) The innovative design of hydraulic components is concentrated at the rear of the equipment, which can be far away from the heat source and increase the stability and reliability of equipment operation. The hydraulic station is equipped with 11kw high-efficiency energy-saving oil pump motor unit, which automatically stops the pump for pressure relief when the equipment is not working. The inlet and outlet oil temperature is cooled by water-cooling equipment, and the temperature difference is controlled at about 5 ℃.
(4) The electrical control mode adopts local and remote control modes, which can be switched freely. The remote control operation can shut down freely and cut off the power supply in an emergency.
(5) The equipment has the advantages of small volume, convenient and flexible operation.
