浏览数量： 0 作者： 严创科技 发布时间： 2019-09-17 来源： 本站
首先，它使操作人员远离炉口热源，在可靠安全点遥控 操作，降低企业的安全成本；再者，它的出现取代了部分劳动力，减少了炉台操作工人数，从而解决了人工荒，同时也降低了生产成本；而且由于下压增大了废钢的密实度，提高能量转换，实际证明比原有传统工艺（未使用炉前机械手）出钢时间每炉快8 ～ 12分钟，提高产量，降低电耗；使用炉前机械手后，炉料更耐用底部耐火材料不易产生高温腐蚀），从而使每打一次炉料可比原来提高5～8炉炉龄寿命。
September 16th, we ushered in the first trip abroad after the Mid-Autumn Festival. Yanchuang Technology Brand Induction Furnace Manipulator loaded on board again and began to float to KPSS Steel Co., Ltd. in Indonesia. This is the first cooperation between the two sides. It also adds a strong brush to our in-depth expansion of the Indonesian market. Up to now, more than half of steel plants have been marketed by our manipulators in Indonesian, which has been widely welcomed and loved by all steelmakers.
As one of the patented products of YanchuangTechnology, the Induction Furnace Manipulator has rapidly moved to steel plants all over the world in a few years and spread widely, The design concept of high performance-price ratio, bringing inestimable market value to investors.
Firstly，operators are far away from the heat source of the furnace hearth and operate remotely in reliable and safe places to reduce the safety cost ofenterprises; furthermore .It replaces part of the labor force, reduces the number of furnace operators, thus resolving the artificial shortage and lowering the production cost; moreover, because the pressure increases the density of scrap steel and improves the energy conversion, it has been proved that the tapping
time is 8-12minutes faster than that of the original traditional process (without the use of furnace manipulator). increase production and reduce power consumption; After using Induction Furnace manipulator, the refractoryis more durable and the bottom refractory is not easy to produce high temperature corrosion, so that the service life of each batch of burden can be increased by 5 to 8 furnaces compared with the original.