根据桂林平钢钢铁有限公司的相关工艺要求，严创科技自主创新、设计、生产的国内首套量子电弧炉废钢过跨全自动加料车（一键启动，由多个传感器信号进入PLC编程控制），即将开始它的征程。
图1振动加料车装车
图2振动加料车装车
图3振动加料车装车
图4振动加料车卸货
该加料车最大可承载20立方废钢，实现集中化加料模式，减少了原工艺加料的频率及时间；大大的提高加料效率。远距离的运送，解决了过跨车间的转运工作；同时行走、升降采用PLC控制，实现运行平稳，卸料舱门自动开启与关闭。
待加料车装满料后，操作人员只需一键启动，加料车自动完成前进至指定位置，料斗抬起，料斗舱门开启，料斗下降，料斗舱门关闭及退至指定位置；同时为了提高效率，整个运送过程实现不同阶段不同速度：启动、提速、匀速、减速、匀速……
According to the process requirements of Guilin Ping Steel Co. , Ltd. , Yan Chuang Technology Independent Innovation, design, production of the first domestic quantum electric arc furnace scrap across the automatic charging vehicle (a key start, by a number of sensor signals into the PLC programming control) , Is about to begin its journey.
The charging vehicle can carry up to 20 cubic scrap steel, realize centralized charging mode, reduce the frequency and time of the original process, and greatly improve the charging efficiency. The long-distance transportation solves the transshipment across the workshop, and the PLC control is used to realize the smooth operation and the unloading cabin door automatically opens and closes.
After the charging vehicle is filled with material, the operator only needs one button to start, and the charging vehicle automatically completes the advance to the designated position, the hopper is lift, the hopper cabin door is opened, the hopper goes down, the hopper cabin door is closed and retreats to the designated position; at the same time, in order to improve efficiency, the entire transport process to achieve different stages of different speed: Start, speed, uniform speed, deceleration, uniform speed..
